1.  Provide adequate safe passage around the work site.
2. Do not practice hygiene while turning on.
3. Do not remove items dropped in the machine when it is turned on.
4. Do not talk to others when starting the machine, so as not to get your hands into the machine.
5. Do not open/remove the safety cover when starting.

6. Do not touch/adjust machine parts, belts, etc. while they are in operation.
7. Long hair must be swept into the hat.
8. Install heavy objects securely to prevent them from falling on people.
9. Do not wipe electrical equipment with a damp cloth.
10. Turn off the power switch and put up warning signs when the power is shut down for maintenance/cleaning. Do not turn on the power switch or lock the power distribution cabinet if someone is working.

11. Check to see if anyone is working on the machine before switching/starting the machine, wait until the other party answers when notifying them to power on, and ensure that it is safe to power on.
12. When the fan is rotating, do not use the safety cover to adjust the wind direction. Do not use the fan without safety cover.
13. When grinding things on the grinder, stand on the side to avoid damage to the grinding wheel and injury.
14. When two people are lifting heavy objects, let go at the same time, such as when lifting pieces into rolls.
15. The fork cannot be placed upright

16. Do not use a ladder without non-slip feet.
17. When using the car/hydraulic forklift to pull heavy objects, be careful not to crush yourself or others' feet, do not walk too fast, so as to avoid crushing or crushing yourself due to too much inertia force, do not push the hydraulic forklift and the rider push the hydraulic truck away.
18. Be careful around your hands to avoid hurting them when moving things.
19. When taking up the carton, hold tightly to avoid cutting your hand when the sharp edges of the carton move against your fingers.
20. Do not fill the container with hot water too full to avoid overflow and scalding.

21. Do not put tools and other foreign objects on the machine.
22. Don't keep working when you feel dizzy.
23. Don't rest sitting where things may fall from high altitude.
24. Do not pass or stay under the forklift while lifting heavy objects.
25. Always wear your safety belt when climbing

26. When drilling, the workpiece should be firmly held before drilling, and the amount of one feed should not be too large to prevent the iron filings from being cut too long.
27.  Things stipulated in the regulations on the prohibition of posts shall be strictly carried out.

Shantou Longsheng Industrial Co., LTD